AEOEZW139
AEOEZW139

Aeotec Nano Switch

AEOEZW139
BGN83.33
Article Dimensions (WxHxL) 42.5 x 40 x 20 mm
Package Dimensions (WxHxL) 73 x 73 x 30 mm
Article net weight 0.029 Kg
Article gross weight 0.052 Kg
Z-Wave Plus
WEEE
CE
Product information "Aeotec NanoSwitch"
With the AEOTEC NanoSwitch, all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via an existing wall switch.
 
The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as an input device for the AEOTEC insert that is controlling the load. The switch only sends a control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with a 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.
Features:
Flush-mounted radio module;
Maximum load: 2,300 W;
Integrates existing installations (lighting, sockets...) into a Z-Wave network;
Works with momentary or toggle switches; 
Voltage: 230V, 50Hz;
Wiring: Neutral conductor required;
Wireless Technology: Z-Wave Plus.
No reviews
Product added to wishlist