Product information "LED Light Strip RGB + CCT - 60 LED/M"
24 Volt Light Strip with RGB and CCT 5-in-1 chip LED.
With this LED strip, you can set different single colors and color change modes like conventional RGB control. You can also switch between warm white light to daylight white light like CCT strip lights. In addition, you can also mix these colors and set color saturations/pastel colors by combining all 5 LED chips on the RGBW + CCT LED strip. This LED strip has a high LED density of 60 LEDs due to the 5-in-1 LED chips and non separated single color diodes.
Installation instructions and controls of the RGBW CCT Light Strip
The strip has a width of 12mm and should be installed on a metallic base for improved cooling, optimal for this are aluminum profiles with a corresponding inner edge. The light band is controlled by external control units that are designed for RGB and CCT, these are controlled via remote controls or a smart home gateway. Its recommened to have a signal input on both sides.
This LED Light Strip can be used with the following controller:
Light output per meter:
- Red 136 lm
- Green 304 lm
- Blue 76 lm
- Warm white 374 lm
- Cold white 479 lm
- Voltage: 24 Volt DC (no power adapter included)
- Protection class: IP20
- Power consumption: 120.00 Watt
- Power: 24 W/m
- color temperature: 2400-6500 Kelvin
- average lifetime: 30000 hours
- switching cycles: 100000
- switch-on time: less than 1 second
- For operation you need the appropriate transformer and a LED controller for RGB with CCT strips
What is RGB?
RGB stands for red, green and blue. RGB lights are equipped with 3 LED Chips. That allows individual color changes and light spectrums by combining the red, green and blue LED light. Overall there are 16 million different light colors, that can be configured with RGB LEDs.
What is RGBW?
RGBW stand for red, green, blue and white. These lights are equipped with 4 LED Chips. With the extra white LED Chip, a clear white light can be set more efficiently and precisely, because the RGB LEDs are not combined to generate a white light.
What is CCT?
CCT stands for correlated color temperature. When using LED lights, CCT stands for a controllable color temperature. The color temperatures reach from 2700 to 6500 Kelvin and can be controlled individually with the correct controller. Warm white light is measured at 2700 Kelvin, neutral white at 4000 Kelvin and daylight at 6500 Kelvin. Depending on the day time you can set a warm or cold color temperature. On one hand its recommended to set a warm light in the evening, similar to the setting sun. On the other hand daylight is more convenient in the morning hours.