Smart Home Kit - Raspberry 1 B + Z-Wave Razberry 2 (EU)
|Article Dimensions (WxHxL)||87 x 18 x 58.64 mm|
|Package Dimensions (WxHxL)||123.8 x 39.73 x 79.43 mm|
|Article net weight||0.046 Kg|
|Article gross weight||0.079 Kg|
Product information "Smart Home Kit - Raspberry 1 B+ & Z-Wave Razberry 2 (EU)"
Built your own Smart Home Gateway with the Raspberry 1 B+ and a Z-Wave.Me Razberry module!
This package includes the Raspberry Pi 1 B+ and the Razberry module. It is only available as long as stock lasts!
Raspberry Pi B+ - Features:
Chip Broadcom BCM2835 SoC
Core architecture ARM11
CPU 700 MHz Low Power ARM1176JZFS Applications Processor
GPU Dual Core VideoCore IV® Multimedia Co-Processor
Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode
Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering
and DMA infrastructure
Memory 512MB SDRAM
Operating System Boots from Micro SD card, running a version of the Linux operating
Dimensions 85 x 56 x 17mm
Power Micro USB socket 5V, 2A (power adapter not included)
Ethernet 10/100 BaseT Ethernet socket
Video Output HDMI (rev 1.3 & 1.4)
Composite RCA (PAL and NTSC)
Audio Output 3.5mm jack, HDMI
USB 4 x USB 2.0 Connector
GPIO Connector 40-pin 2.54 mm (100 mil) expansion header: 2x20 strip Providing 27 GPIO pins as well as +3.3 V, +5 V and GND supply lines
Camera Connector 15-pin MIPI Camera Serial Interface (CSI-2)
JTAG Not populated
Display Connector Display Serial Interface (DSI) 15-way flat flex cable connector with two data lanes and a clock lane
Memory Card Slot Micro SDIO
Note: This package is a soft bundle and does not include its own packaging for the Kit. Both products are shipped in their original packaging.