FIBARO Double Smart Module
|Article Dimensions (WxHxL)||38.25 x 20.3 x 42.5 mm|
|Package Dimensions (WxHxL)||65 x 65 x 44 mm|
|Article net weight||0.029 Kg|
|Article gross weight||0.064 Kg|
With the FIBARO Double Smart Module, you can integrate existing electrical installations (e.g. lighting, airing systems…) into a Z-Wave network. Thus, the connected devices can still be controlled with the existing wall switch, but – thanks to Z-Wave – also via remote control, smartphone or sensor-controlled automation.
The compact radio module is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the loads but acts as input device for the FIBARO insert that is controlling the loads. The switch only sends control signal to the insert which controls the loads then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.
The integrated energy consumption measurement function provides how much energy the connected device use. So you can identify the energy eater in your Smart Home.
- Radio module for wall box installation
- Rated load current: 6A in single version, 9.5A completely in double version
- Power supply: 100-240 VAC ~ 50/60 HZ or 24-30VDC
- Two potential-free outputs
- Wireless Technology: Z-Wave Plus