Aeotec Nano Switch with Power Metering
|Article Dimensions (WxHxL)||42.5 x 40 x 20 mm|
|Package Dimensions (WxHxL)||73 x 73 x 30 mm|
|Article net weight||0.029 Kg|
|Article gross weight||0.051 Kg|
With the AEOTEC NanoSwitch, all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via an existing wall switch. Additionally, the ZW132 has an integrated power metering function which allows detecting the exact energy consumption of the connected load. The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as an input device for the AEOTEC insert that is controlling the load. The switch only sends a control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with a 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.
Features:Flush-mounted radio module;
Maximum load: max. 2x 1150W;
Energy metering function;
Integrates existing installations (lighting, sockets...) into a Z-Wave network;
Works with momentary or toggle switches;
Voltage: 230V, 50Hz;
Wiring: Neutral conductor required;
Wireless Technology: Z-Wave+.