Raspberry B+

77,00 лв.
Article Dimensions (WxHxL) 85 x 20 x 58 mm
Package Dimensions (WxHxL) 121 x 23 x 76 mm
Article net weight 0.039 Kg
Article gross weight 0.054 Kg
IP-Rating IP20

Product information "Raspberry B+"

The Raspberry 1 B+ board is a small PC to develop your own IOT projects. The board is features with a slim size but high performance. 

In combination with the Razberry module by Z-Wave.Me you can easily build a powerful Smart Gateway. Use the Raspberry 1 B+ as the base and plug on the Razberry module. Thanks to the included license for the Smart Home Software Z-Way you can build an own Smart Home Gateway in just a few steps.  


  • Chip Broadcom BCM2835 SoC
  • Core architecture ARM11
  • CPU 700 MHz Low Power ARM1176JZFS Applications Processor
  • GPU Dual Core VideoCore IV® Multimedia Co-Processor
  • Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode
  • Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering
  • and DMA infrastructure
  • Memory 512MB SDRAM
  • Operating System Boots from Micro SD card, running a version of the Linux operating
  • system
  • Dimensions 85 x 56 x 17mm
  • Power Micro USB socket 5V, 2A (power adapter not included)
  • Ethernet 10/100 BaseT Ethernet socket
  • Video Output HDMI (rev 1.3 & 1.4)
  • Composite RCA (PAL and NTSC)
  • Audio Output 3.5mm jack, HDMI
  • USB 4 x USB 2.0 Connector
  • GPIO Connector 40-pin 2.54 mm (100 mil) expansion header: 2x20 strip Providing 27 GPIO pins as well as +3.3 V, +5 V and GND supply lines
  • Camera Connector 15-pin MIPI Camera Serial Interface (CSI-2)
  • JTAG Not populated
  • Display Connector Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane
  • Memory Card Slot Micro SDIO
No reviews
Product added to wishlist